Testing labs in Seriate

P&P LMC Srl is an integrated engineering and laboratory services company based in Seriate, in the Province of Bergamo, Lombardy region of northern Italy. Operating within the broader P&P Group (Gruppo P&P), the organization offers a wide portfolio of professional services encompassing laboratory analysis, engineering consultancy, structural investigations, and environmental monitoring. With a team of approximately 26 specialists housed in a modern operational facility covering more than 3,000 square meters, P&P LMC serves the analytical and testing needs of industrial, municipal, public-sector, and engineering clients across Italy. One of the company's flagship divisions is its environmental chemical analysis laboratory (Laboratorio analisi chimiche ambientali), which holds accreditation from ACCREDIA, Italy's national accreditation body. The laboratory is equipped to analyze a comprehensive range of environmental matrices including soils, earths and rock formations, groundwater, surface water, industrial wastewater, stormwater discharges, and atmospheric emissions. Services extend to the characterization and classification of waste materials to determine hazard classifications and assign the correct European Waste Catalogue (EWC) codes, in full compliance with applicable Italian and European Union environmental regulations. The laboratory provides all the analytical parameters required by current legislation governing waste disposal, effluent management, discharge permits, and environmental remediation programs. A particularly distinctive capability of P&P LMC is its scanning electron microscopy (SEM) unit, which underpins both environmental investigations and materials characterization work. The company is listed in the Italian Ministry of Health's register of laboratories qualified to conduct asbestos fiber analysis by SEM — a technically rigorous method required under Italian occupational hygiene legislation for the assessment of buildings, demolition sites, and industrial facilities where asbestos-containing materials may be present. In addition, the laboratory carries out airborne particulate sampling and workplace air-quality monitoring, supporting compliance with health, safety, and environmental regulations for demolition, renovation, and manufacturing operations where airborne hazards must be documented. P&P LMC operates an authorized civil materials laboratory (Laboratorio Civile / Laboratorio prove materiali) recognized by the Italian Higher Council of Public Works (Consiglio Superiore dei Lavori Pubblici). This recognition grants the laboratory the authority to issue Official Certificates (Certificati Ufficiali) that are legally required for structural testing in the Italian construction sector. Core testing services include compressive strength evaluation of concrete test cubes, tensile and ductility testing of reinforcing steel bars (rebar), and mechanical characterization of structural steelwork and carpentry elements. These certificates constitute the formal documentation required for structural compliance under Italian building regulations and are accepted by public authorities and project supervisors nationwide. Complementing its new-construction materials testing capabilities, P&P LMC holds an additional authorization from the Ministry of Infrastructure and Transport to conduct investigations on existing buildings (Laboratorio costruzioni esistenti). The laboratory is accredited in sectors A, B, and C under Ministerial Circular 633/STC, covering non-destructive testing (NDT) methodologies and in-situ sampling techniques applied to reinforced concrete structures, masonry, and mixed construction systems. These services support structural safety assessments, vulnerability studies, seismic risk evaluations, and renovation planning for existing infrastructure — an area of growing relevance given Italy's substantial stock of aging buildings and bridges. The mechanical testing laboratory (Laboratorio prove meccaniche) at P&P LMC carries out a wide range of tests aimed at the verification, control, qualification, and approval of materials and industrial components. With more than twenty years of accumulated expertise and an extensive portfolio of test methods, the laboratory serves clients across multiple industrial sectors. Of particular note is the laboratory's capacity for aeronautical testing, representing the most demanding tier of mechanical qualification; tests in this sector must adhere to the strict technical specifications and acceptance criteria stipulated by aerospace customers, confirming P&P LMC's ability to operate at the highest levels of industrial precision and regulatory rigor. The company also provides a comprehensive instrument calibration and certification service (Laboratorio taratura strumenti) covering mechanical, electromechanical, electronic, chemical, and electro-medical measuring instruments. The calibration service operates in conformity with UNI EN ISO 9001:2015 and UNI CEI EN ISO/IEC 17025:2018, ensuring full metrological traceability and documented measurement reliability. This service supports manufacturers, healthcare and medical device operators, research institutions, and regulated-industry clients that require legally recognized calibration records for their equipment. P&P LMC Srl's combination of ACCREDIA accreditation, Ministry of Health SEM qualification for asbestos analysis, Ministry of Infrastructure and Transport authorization for structural investigations, and Higher Council of Public Works recognition for construction materials testing positions it in an exclusive tier of Italian multi-disciplinary testing organizations. Its broad service portfolio — spanning environmental chemistry, waste characterization, asbestos and airborne fiber analysis, civil materials testing, non-destructive structural investigation, mechanical component qualification, and instrument calibration — together with its experienced team and large multi-laboratory facility in Seriate, makes P&P LMC Srl a credible and comprehensive testing partner for industrial, construction, environmental, and regulated-sector clients seeking authoritative Italian laboratory services.

STERIS Applied Sterilization Technologies (STERIS AST) is a global provider of contract sterilization and laboratory testing services, serving manufacturers of medical devices, pharmaceuticals, and pharmaceutical packaging. As a division of STERIS plc, one of the world's largest infection-prevention and health-science technology companies, STERIS AST operates more than 60 processing facilities across the world, offering customers a technology-neutral, globally coordinated network for product sterilization and microbial reduction. The company's primary clients are healthcare product manufacturers who require validated, regulatory-compliant sterilization and analytical testing to bring safe products to market. The centerpiece of STERIS AST's offering is its contract sterilization service (Sterilizzazione a contratto), delivered through a portfolio of six core technologies: gamma irradiation using cobalt-60 sources, accelerated electron beam (e-beam) processing, X-ray irradiation, ethylene oxide (ossido di etilene) gas sterilization, vaporized hydrogen peroxide (VHP), and saturated steam. Because each technology has distinct penetration characteristics, dose uniformity profiles, and material compatibility requirements, STERIS AST positions itself as technology-neutral, helping customers select the method best suited to their specific product material, packaging geometry, and regulatory pathway rather than defaulting to a single modality. Sterilization is supported by comprehensive laboratory testing services (Servizi di Prove di Laboratorio) that span both microbiological and analytical disciplines. Microbiological testing capabilities include bioburden enumeration, sterility testing, biological indicator (BI) qualification, endotoxin/pyrogen evaluation, and microbial identification — all critical inputs for dose-setting studies and ongoing process verification under ISO 11137 and related standards. Analytical and physicochemical testing of products and packaging assesses compatibility, extractables and leachables, residual ethylene oxide (EtO) and ethylene chlorohydrin levels, and package integrity, providing the full validation evidence package required by regulatory bodies such as the FDA, EMA, and ISO 13485 quality systems. A dedicated dosimetry service (Servizi Dosimetri) supports the sterilization process by supplying and reading red perspex pellet (PMMA) and alanine dosimeters — the two reference dosimeter systems recognized internationally for measuring absorbed ionizing radiation dose during gamma, e-beam, and X-ray processing. Accurate dosimetry mapping is the foundation of dose validation and routine process control for radiation sterilization, and STERIS AST's in-house dosimetry capability ensures continuity between process development, validation, and production-release activities. Global facility coverage exceeds 60 sites, encompassing a geographic footprint across North America, Europe, Asia-Pacific, and Latin America. This scale enables customers to qualify multiple processing sites for business-continuity planning or to locate processing close to their manufacturing or distribution centers, reducing transit time and cold-chain risk. The company's proprietary STERILINK℠ portal provides customers with real-time, interactive online visibility into the status of their product at STERIS AST processing facilities, delivering electronic records, processing certificates, and traceability data directly into customers' supply-chain systems. STERIS AST supports its clients' complex regulatory and process challenges through its TechTeam℠ program, a team of dedicated technical professionals who provide expert guidance on sterilization process development, validation strategy, dose-setting, packaging compatibility, and laboratory testing interpretation. These specialists publish peer-reviewed industry articles in collaboration with sector journals, produce downloadable white papers (TechTips), and host free TechTalk webinar series — evidence of the organization's standing as a technical authority in sterilization science and a resource well beyond transactional processing. Quality credentials at STERIS AST facilities typically include ISO 13485 certification for medical device quality management systems and ISO/IEC 17025 accreditation for specific laboratory testing and dosimetry activities, with individual site accreditations varying by location and scope. Many facilities hold national regulatory approvals relevant to pharmaceutical GMP requirements, supporting product release for pharmaceutical manufacturers operating under cGMP frameworks in their respective jurisdictions. This combination of global reach, multi-technology capability, validated laboratory services, and deep regulatory expertise makes STERIS AST a widely trusted contract sterilization and testing partner for medical device and pharmaceutical supply chains worldwide.